Outdoor LED luminaire with direct light street optics with high level visual comfort (G4). Suitable for pole-top and lateral mounting.
LED Chips Cree, Samsung, Osram, Nichia or similiar 3030 | 3535 high effieciency LED Chips based on required specifications.
LED Driver 0-10V/1-10V Dimmable Philips or alternative control gear with mutual consent.
Optics Poly-Carbonatelenses are used to meet the standard level of lighting based on the lighting class and the road type.
Housing is made of die-cast ADC-12 aluminum alloy, and subjected to a two-step pre-treatment process: degreasing, and chromate conversioncoating.
Mounting Console can be tilted in 5° steps, ranging from -15° to +15°. The inner diameter of the mounting console is 67mm. For poles with a diameter equal to or smaller than 60 mm.
IP 66 rating is guaranteed by two single-part silicone gaskets used both under the glass closure and the driver closure lid.
IK 10 impact rating is provided by the housing and min. IK 08 for tempered glass cover.
Surge Protection internal SPD with 10kV(common mode) and 6kV(differential mode) protection Optional external 10KV SPD for external overvoltage protection is also available.
Tool-less driver lid opening for easy access in case of need for on-site maintenance.
Power Cut optional 3-PIN M29 knife switch to cut the internal energy when the lid is opened in order to increase safety measures.
Painting stage consists of electrostatic powder coating, cured at 205°C for over 10 minutes.
Power Cut Provides security by cutting off the luminaire’s power while the lid is open.
Mounting Console Tiltable pole console is suitable for mounting horizontally and
vertically, ranging from -15 to +15 degrees.
Level Meter Ensures the fixture’s parallel instalation to the road surface.
No-Screw Lid Tool-less and no-screw access to the driver’s section.
